Tools · Architecture

Smart Stair

Click the foot and the top: the risers, the going and 2R+G come from the levels, checked against the dwelling-stair rules (riser at most 180, going at least 270, Blondel 600–650). Simple, Slab, ZigZag, Steps and Treads; a typed width or number of risers; one group, one Undo.

3Tab148r12005

How to use it

  1. Start Smart Stair and press Tab to choose Simple, Slab, ZigZag, Steps, Treads, Ramp or Spiral; on the card choose the Plan (Straight or With landing), the Line (Centre, Left edge, Right edge), the railing (bars, glass, rods, solid, none) and its side.
  2. Type a width, or a number of risers, if you need them.
  3. Click the foot: where the first riser stands (a spiral: its centre).
  4. Move the mouse; the card shows risers, going, 2R+G and the rule checks.
  5. Click the top: the edge the stair arrives at (a spiral: a point on the top floor's edge — the radius and where it arrives).
  6. With landing: click the foot, then the landing (where the stair rests or turns), then the top. The top ahead makes a straight stair with a landing, to a side an L, back beside the first flight a U.

Keys

Tab
Next stair type
Shift
After the foot: hold to keep the direction
Arrows
After the foot: lock to an axis
Esc
Drop the foot; again to leave the tool

Type in the measurements box

1200
Width of 1200 in the model's units
17r
Seventeen risers

Good to know

  • The number of risers comes from a 175 mm riser unless you type it; the last step ends level with the top edge.
  • Checks: riser at most 180 mm, going at least 270 mm, 2R+G between 600 and 650 mm. A stair that fails is still drawn and the report says why.
  • The top must be higher than the foot. Clicked straight above the foot, the going is 280 mm.
  • Simple, Slab and ZigZag are one closed solid; Steps and Treads are one body per step inside the stair's group.
  • The railing: an oak handrail 900 above the nosings on steel posts, with bars, glass, rods or a solid upstand; both sides, the left or the right. A spiral turns oak wedges round a steel column, its walking line (60 % of the radius) 230 a tread, its handrail a helix; anticlockwise or clockwise on the card.
  • Type and width are remembered. One group, drawn in the open context; one Undo removes it.
  • Landings: both flights share one going so the stair arrives at the top you clicked; the landing moves to the nearest whole step. It is at least the width and 1000 mm (a ramp: 1500), and its open edges get a guard 1100 high. A U turns round a 100 mm well.
  • Line: Left edge or Right edge puts the stair beside the line you click — draw along a wall, or round a wall's corner for an L. No railing and no guard on the wall's side.
  • Ramp: one slope from the foot to the top. Checks: at most 1:12 (8.3 %), the slope recommended for its height (8 % up to 150 mm, 7 % to 500, 6 % to 1000, then 5 %), and a landing every 760 mm of rise — draw it With landing.

Always

  • One Undo takes the whole action back.
  • Shared components: you choose this copy or all copies.
  • The result is told in plain words; a refusal changes nothing.